Estimating & Procurement Services
Need a real budget before you commit to a build in Ghana? Contractors Ghana runs QS-led estimating and material procurement — a measured Bill of Quantities, value engineering, and disciplined buying against the BoQ. A classified, credentialed contractor since 1980, serving clients across Ghana. Request a capability statement or consultation.
A budget is only as honest as the measurement behind it. Contractors Ghana runs QS-led estimating and material procurement — a measured Bill of Quantities, value engineering, and disciplined buying against the BoQ — a classified, credentialed contractor since 1980. Request a capability statement or book a consultation: +233 23 063 0030.
Why Clients Choose Contractors Ghana
The Honest-Budget Engine
We do not quote a guessed per-square-metre figure. A quantity surveyor measures your specific build from the drawings and prices it into a Bill of Quantities — the real, whole-build cost — so you budget against a number that holds, not one that doubles halfway through.
QS-Led Measurement
Our estimating is led by quantity surveyors registered with the Ghana Institution of Surveyors (GhIS). Every quantity is taken off the drawings and measured against the Ghana Building Code (GS 1207:2018) — not assumed from a rate of thumb.
Value Engineering With Real Numbers
When budget and brief do not meet, we put value-engineering options in front of you — alternative specifications, sequencing, or finishes that protect the structure while bringing cost into reach. You decide with the real figures on the table.
Disciplined Procurement
We buy materials against the approved BoQ from established suppliers, verify quantity and quality on delivery, and document spend — so the project is procured on budget, not topped up by surprise.
What We Deliver
Cost Estimating & Bill of Quantities
A quantity surveyor measures every element from your drawings — substructure, frame, blockwork, roof, finishes, services — and prices it into a line-by-line, whole-build BoQ you can budget and tender against.
Material Procurement
We procure materials against the approved BoQ from established suppliers, verify quantity and quality on delivery, and document every purchase — so buying stays disciplined and on budget.
Value Engineering & Cost Advice
Where cost and brief diverge, we propose alternatives that protect the outcome and bring the figure into reach, so you make decisions with real numbers, not guesses.
| Service | What we deliver |
|---|---|
| Cost estimating | QS-led take-off and pricing from your drawings |
| Bill of Quantities | Line-by-line, whole-build measured cost document |
| Value engineering | Costed alternatives that protect the outcome |
| Material procurement | Disciplined buying and verification against the BoQ |
Our Estimating & Procurement Process
- Drawings & scope review — measure the building you intend to build, not an assumed one.
- Quantity take-off & measurement — a QS measures every element from the drawings.
- Bill of Quantities & pricing — measured quantities priced into a whole-build BoQ.
- Value engineering — costed options where budget and brief do not meet.
- Procurement against the BoQ — disciplined buying, verified and documented.
Credentialed & Classified
- Estimating led by quantity surveyors registered with the Ghana Institution of Surveyors (GhIS)
- Measured to Ghana’s building regulations (L.I. 1630) and the Ghana Building Code (GS 1207:2018)
- Registered professional input — architects (GIA), engineers (GhIE / Engineering Council) — where the project requires it
- Building-permit and EPA permitting (L.I. 1652) support as part of the project
- Capability statement + contractor classification shared on request
- Established 1980 — a real firm with a portfolio, a written warranty, and accountability
What It Costs — Honestly
There is no honest single per-square-metre rate for building in Ghana — published estimates diverge wildly because every site, design, and finish level is different. The real cost comes from a Bill of Quantities: a quantity surveyor measures and prices every material and trade for your specific build, end to end. That whole-build figure — not a per-square-metre shortcut — is the only number you can safely budget against. (Material prices move — cement roughly GH₵85–130/bag, iron rods around GH₵6,300–11,000/ton — which is exactly why a measured BoQ beats a guess.)
Estimating & Procurement Across Greater Accra & Beyond
We estimate, budget, and procure for projects across East Legon, Airport Residential, Cantonments, Trasacco, Spintex, Tema, Adenta, Dzorwulu, Labone, and Ridge — plus Kumasi and Takoradi. Diaspora clients receive the BoQ and procurement reporting remotely, with full visibility on spend.
Areas We Serve
Contractors Ghana estimates and procures across Greater Accra — East Legon, Airport Residential, Cantonments, Trasacco, Spintex, Tema, Adenta, Dzorwulu, Labone, Ridge — plus Kumasi and Takoradi.
Related Services
- Construction Cost & BoQ Guide — how a real building budget is built
- Building Contractors in Accra — design, build & manage end-to-end
- Quality Assurance Programs — QA/QC and code compliance on site
- Multi-Trade Orchestration — every trade managed to programme
Frequently Asked Questions
How much does it cost to build in Ghana? There is no honest single per-square-metre price — the real cost comes from a Bill of Quantities measured for your specific build, end to end. We prepare one so you budget against a real whole-build figure, not a guess. Material prices move (cement ~GH₵85–130/bag, rods ~GH₵6,300–11,000/ton), which is why a BoQ beats a blog estimate.
What is a Bill of Quantities and why does it matter? It is the line-by-line, measured-and-priced schedule of every material and trade in your build, prepared by a quantity surveyor — the only way to budget against a real number, compare quotes like for like, and procure with discipline.
Are your quantity surveyors qualified? Yes — estimating is led by quantity surveyors registered with the Ghana Institution of Surveyors (GhIS), working to L.I. 1630 and the Ghana Building Code (GS 1207:2018). We share our capability statement and classification on request.
Can you estimate and procure for my own build team? Yes — we provide standalone QS-led estimating, a measured BoQ, and procurement support even where another team is building, so you get the honest budget and disciplined buying without handing over the whole contract.